Connecting Jandy equipment

Pumps, heaters and heat pumps, salt cell, and spa-side remotes. RS-485 is preferred where the equipment supports it.

Guides · 6

Jandy VSFloPro Pumps
Disconnect the Pump Display/Controller Before attempting to wire the pump to The Attendant, you'll need to remove the Local Controller...
Jandy ePump / VS Plus Pumps
Connecting the Jandy ePump requires connecting the wires from pins 2 and 3 (black and yellow) from the supplied Jandy...
Jandy JXi, JXiQ, JRT, and JE Heaters and Heat Pumps
Overview The Jandy JXi Series heaters can be controlled by The Attendant using either a Serial RS-485(BUS) connection (recommended) or...
Jandy AquaPure/TruClear Salt Water Chlorine Generator
The Jandy AquaPure requires voltage to be supplied in order to communicate. Please reference the following diagram to connect the...
Jandy 4-Function Spa Side Remote
Spa side remotes are a common feature that many people enjoy in their spa and The Attendant is capable of...
Jandy SpaLink RS 8-Function Spa Side Remote
Spa side remotes are a common feature that many people enjoy in their spa and The Attendant is capable of...

Some guide bodies not yet published — excerpts only